CADCOR Products and Merchandise

Airframe Specs

Description:
Two seat, tandem, low wing, monoplane, unlimited aerobatic airplane

Airframe:
All carbon fiber epoxy composite structure
Spring aluminum landing gear
Sawtooth leading edge triple taper wing
Spadelss variable hinge point ailerons

Standard Equipment:
"Cool Face" cowling
Cleveland heavy duty 500 x 5 wheels and brakes
Low drag wheel fairings
Disc damped free swiveling tailwheel
Removable wing tie down rings

Cockpit:
20G front and rear seats
Acrobelt aerobatic seat belt system with ratchets, front and rear seat
Oregon Aero seating system
Linear throttle control
Linear rudder pedals, adjustable front and rear
Front and rear toe brakes
Cabin air inlets, 2 front and 2 rear
Canopy fresh air taxi latch

Performance:
Cruise Speed, 8,000ft, ISA, 75% power = 210 KTAS
   Fuel flow = 17.0gal/hr
   Range = 840 nm
Initial rate of climb, 1,750 lbs, SL, ISA = 2,500 ft/min
Stall Speed, power off, 1,750 lbs = 58 KIAS
Stall Speed, power on, 1,750 lbs = less than 40 KIAS
Never Exceed Speed = 230 KTAS
Roll rate @ 180 knots = 385 deg/sec
Performance data are preliminary based on test flights 4/04 - 7/04.

Dimensions and Weights:
Length = 21.5 ft
Wing Span = 24.0 ft
Wing Area = 105 sq ft
Cockpit width, front/rear = 26/23 in
Structural Limits = +/- 10g
Empty Weight = 1,325 lbs
Max Aerobatic Gross Weight = 1,750 lbs
Wing Loading @ 1,750 lbs = 16.7 lb/sq ft
Power loading @ 1,750 lbs = 5.0 lb/hp

Standard Equipment:
Total capacity, 78 gal
Main fuel tank, with inverted capability, 30 gal
Wing fuel tanks. 48 gal

Engine:
Lycoming AEIO-540, up to 350 hp
   Can accomodate engines up to Lycoming IO-580

Airframe Optional Equipment:
Integral smoke oil tank, 7 gallon capacity
Rear baggage compartment
Tinted canopy

CADCOR
6107 S.W. Murray Blvd. #283
Beaverton, OR 97008
(503) 577-4067
email: sales@cadcor.com
www.cadcor.com